Air Elevator

Home Products

Email ([email protected]), we will reply to you within 24 hours

Air Elevator

【Introduction】: A slurry transporting equipment by compressed air

【Lifting Head】: 3-5m

【Improvement】: No moving part

This air elevator is used in carbon paste flow and cyanidation process. The carbon-immersing tank should match other auxiliary devices like Carbon-separating Screen, and recessed impeller pump etc. Its structural features: the upper and lower layer of impellers are of steel plate encapsulated with rubber, which is connected by means of bolts, with the features like good equilibrium, easy replacement and long service life. The main shafts are divided into the upper layer and the lower layer which are connected by means of locating flanges able to reduce the lifting height; inflate at several points dispersingly with good air mixing performance.


(1)Scientific and reasonable design, decrease the damage to carbon.

(2)High efficiency, the time of lifting carbon is 0.5~1 hours.

(3)Small volume, it is convenient to install on leaching agitation tank or adsorption tank; convenient operation and maintenance.

Pressure air is inflated into air lifter, which reduces the air density of ore pulp pipe and causes the pressure difference between pipe and tank. By the action of pressure, ore pulps in the tank are lifted by air lifter.

Model

Sepc of the suction pipe (mm)

Sepc of the air pipe(mm)

Application range

KT60

Φ60×2.5

20

SJ2.5×3.15, SJ3×3.15, SJ3×3.5, SJ3.15×3.55, SJ3.55×4

KT80

Φ89×4

Φ48×4

SJ7×7.5

KT100

Φ108×4

Φ48×4

SJ4×4.5, SJ4.5×5, SJ5×5.6, SJ5.5×6, SJ7.5×8, SJ8×8.5, SJ8.5×9

contact us

ANY HELP ?

Need Quotation and Customized Production Line?

We are always here to Help.

Please Fill the Form to Get in Touch.

  • *
  • *
  • *
  • *
  • *
Share